Forum Index

Printing on discs

Post your technical support questions here.

Printing on discs

Postby Brian_E » Mon Apr 27, 2015 9:18 am

I have just replaced my Canon MG6250 printer with an Epson Premium XP-720 and printed a test disc, which apart from the ink being a bit too dense, printed fine (I used the Epson Tray #2 template). However, since upgrading to version 6, the printing is way out of line (see upload of the template I used, which was a custom version of the standard Epson CD tray template to take account of full-face printing). I'm at a loss as to why this should be and which settings I should now be using. Can you advise me please?
Attachments
img001.jpg
The result.
img001.jpg (Viewed 12839 times)
Screenshot - 27_04_2015 , 16_14_54.jpg
The template I used.
Screenshot - 27_04_2015 , 16_14_54.jpg (Viewed 12839 times)
Brian_E
 
Posts: 2
Joined: Mon Apr 27, 2015

Re: Printing on discs

Postby Brian_E » Mon Apr 27, 2015 9:38 am

I've found the answer - it's now necessary to use tray 1, rather than tray 2 as with the older version of Audio Label.
Brian_E
 
Posts: 2
Joined: Mon Apr 27, 2015

cron
© 2024 CdCoverSoft