Forum Index

How can I type something on the spine on the DVD case?

Post your technical support questions here.

How can I type something on the spine on the DVD case?

Postby jlequick1 » Sun Oct 06, 2013 3:52 pm

How can I type something into the spine on the DVD case?
jlequick1
 
Posts: 2
Joined: Sun Oct 06, 2013

Re: How can I type something into the spine on the DVD case?

Postby Admin » Mon Oct 07, 2013 12:25 pm

Hi There,

If you are starting from a blank DVD design, make sure "Case" is selected on the toolbar. Click the "Insert" button from the top toolbar and select "Text". A horizontal text box will appear where you can type your information. Next, rotate the text to the correct angle (hold down the left mouse button over the circular selection dot). You will then need to manually adjust the dimensions of the inserted text box to fit the width and height of the spine.

Let me know if you need further assistance.
Image
User avatar
Admin
 
Posts: 385
Joined: Tue Oct 16, 2012

Re: How can I type something into the spine on the DVD case?

Postby jlequick1 » Mon Oct 07, 2013 6:05 pm

Perfect! Worked great! Thanks for the tip.
jlequick1
 
Posts: 2
Joined: Sun Oct 06, 2013

cron
© 2024 CdCoverSoft